Technical
-> Product Testing
Carroll & Meynell is an ISO9001 : 2000 approved manufacturer
All Carroll & Meynell products are subject to Quality
Assurance testing at the end of the Core and coil assembly
process prior to resin coating. They receive a Final Quality
Assurance Test and Inspection following completion of the
units after coating.
Product
|
Routine Testing |
Optional Additional Tests |
| Transformers |
- Turns Ratio Test
- Voltage Measurement Test
- No Load Current Measurement Test
- No Load Loss Measurement Test
- High Potential Test
- Between Primary and Secondary
- Between Primary and Core
- Between Secondary and Core
- Insulation Resistance Test
- Between Primary and Secondary
- Between Primary and Core
- Between Secondary and Core
- Induced Voltage Test
- Visual Inspection
|
- Impedance Measurement Test
- Coil Loss Measurement Test
- Coil Resistance Measurement Test
|
| Inductors |
- Inductance Measurement Test
- High Potential Test
- Visual Inspection
|
|
|
Quicklinks
